Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VKJ0 |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: EXTERIOR PANELS / TRIM: REAR SPOILER: INSTALLATION; 2016 - 2020 MY Sienna [12/2015 - ] |
INSTALLATION
PROCEDURE
1. INSTALL NO. 6 REAR SPOILER PROTECTOR
HINT:
When installing the No. 6 rear spoiler protector, heat the rear spoiler cover using a heat light.
CAUTION:
-
Do not touch the heat light and heated parts, touching the heat light may result in burns.
-
Touching heated parts for a long time may result in burns.
Standard:
Item
|
Temperature
|
Rear spoiler cover
|
20 to 30°C (68 to 86°F)
|
NOTICE:
Do not heat the rear spoiler cover excessively.
(a) Clean the No. 6 rear spoiler protector installation surface with a non-residue solvent.
(b) Apply primer to the No. 6 rear spoiler protector installation area on the rear spoiler cover.
NOTICE:
Apply primer evenly so that there are no uncoated areas.
(c) Remove the peeling paper on a new No. 6 rear spoiler protector while making sure not to touch the adhesive surface.
(d) Install the No. 6 rear spoiler protector as shown in the illustration.
NOTICE:
-
Press the double-sided tape on the No. 6 rear spoiler protector firmly to attach.
-
After the primer dries (3 minutes or more), install the No. 6 rear spoiler protector.
-
After applying primer, reapply primer after 24 hours elapse.
|
|
2. INSTALL NO. 5 REAR SPOILER PROTECTOR
HINT:
When installing the No. 5 rear spoiler protector, heat the rear spoiler cover using a heat light.
CAUTION:
-
Do not touch the heat light and heated parts, touching the heat light may result in burns.
-
Touching heated parts for a long time may result in burns.
Standard:
Item
|
Temperature
|
Rear spoiler cover
|
20 to 30°C (68 to 86°F)
|
NOTICE:
Do not heat the rear spoiler cover excessively.
(a) Clean the No. 5 rear spoiler protector installation surface with a non-residue solvent.
(b) Apply primer to the No. 5 rear spoiler protector installation area on the rear spoiler cover.
NOTICE:
Apply primer evenly so that there are no uncoated areas.
(c) Remove the peeling paper on a new No. 5 rear spoiler protector while making sure not to touch the adhesive surface.
(d) Install the 3 No. 5 rear spoiler protectors as shown in the illustration.
NOTICE:
-
Press the double-sided tape on the No. 5 rear spoiler protector firmly to attach.
-
After the primer dries (3 minutes or more), install the No. 5 rear spoiler protector.
-
After applying primer, reapply primer after 24 hours elapse.
|
|
3. INSTALL NO. 10 REAR SPOILER PROTECTOR
HINT:
When installing the No. 10 rear spoiler protector, heat the rear spoiler cover using a heat light.
CAUTION:
-
Do not touch the heat light and heated parts, touching the heat light may result in burns.
-
Touching heated parts for a long time may result in burns.
Standard:
Item
|
Temperature
|
Rear spoiler cover
|
20 to 30°C (68 to 86°F)
|
NOTICE:
Do not heat the rear spoiler cover excessively.
(a) Clean the No. 10 rear spoiler protector installation surface with a non-residue solvent.
(b) Apply primer to the No. 10 rear spoiler protector installation area on the rear spoiler cover.
NOTICE:
Apply primer evenly so that there are no uncoated areas.
(c) Remove the peeling paper on a new No. 10 rear spoiler protector while making sure not to touch the adhesive surface.
(d) Install the 5 No. 10 rear spoiler protectors as shown in the illustration.
NOTICE:
-
Press the double-sided tape on the No. 10 rear spoiler protector firmly to attach.
-
After the primer dries (3 minutes or more), install the No. 10 rear spoiler protector.
-
After applying primer, reapply primer after 24 hours elapse.
|
|
4. INSTALL NO. 4 REAR SPOILER PROTECTOR
HINT:
When installing the No. 4 rear spoiler protector, heat the rear spoiler cover using a heat light.
CAUTION:
-
Do not touch the heat light and heated parts, touching the heat light may result in burns.
-
Touching heated parts for a long time may result in burns.
Standard:
Item
|
Temperature
|
Rear spoiler cover
|
20 to 30°C (68 to 86°F)
|
NOTICE:
Do not heat the rear spoiler cover excessively.
(a) Clean the No. 4 rear spoiler protector installation surface with a non-residue solvent.
(b) Apply primer to the No. 4 rear spoiler protector installation area on the rear spoiler cover.
NOTICE:
Apply primer evenly so that there are no uncoated areas.
(c) Remove the peeling paper on a new No. 4 rear spoiler protector while making sure not to touch the adhesive surface.
(d) Install the 2 No. 4 rear spoiler protectors as shown in the illustration.
NOTICE:
-
Press the double-sided tape on the No. 4 rear spoiler protector firmly to attach.
-
After the primer dries (3 minutes or more), install the No. 4 rear spoiler protector.
-
After applying primer, reapply primer after 24 hours elapse.
|
|
5. INSTALL NO. 3 REAR SPOILER PROTECTOR
HINT:
When installing the No. 3 rear spoiler protector, heat the rear spoiler cover using a heat light.
CAUTION:
-
Do not touch the heat light and heated parts, touching the heat light may result in burns.
-
Touching heated parts for a long time may result in burns.
Standard:
Item
|
Temperature
|
Rear spoiler cover
|
20 to 30°C (68 to 86°F)
|
NOTICE:
Do not heat the rear spoiler cover excessively.
(a) Clean the No. 3 rear spoiler protector installation surface with a non-residue solvent.
(b) Apply primer to the No. 3 rear spoiler protector installation area on the rear spoiler cover.
NOTICE:
Apply primer evenly so that there are no uncoated areas.
(c) Remove the peeling paper on a new No. 3 rear spoiler protector while making sure not to touch the adhesive surface.
(d) Install the 2 No. 3 rear spoiler protectors as shown in the illustration.
NOTICE:
-
Press the double-sided tape on the No. 3 rear spoiler protector firmly to attach.
-
After the primer dries (3 minutes or more), install the No. 3 rear spoiler protector.
-
After applying primer, reapply primer after 24 hours elapse.
|
|
6. INSTALL NO. 3 REAR SPOILER PROTECTOR
HINT:
When installing the No. 3 rear spoiler protector, heat the rear spoiler cover using a heat light.
CAUTION:
-
Do not touch the heat light and heated parts, touching the heat light may result in burns.
-
Touching heated parts for a long time may result in burns.
Standard:
Item
|
Temperature
|
Rear spoiler cover
|
20 to 30°C (68 to 86°F)
|
NOTICE:
Do not heat the rear spoiler cover excessively.
(a) Clean the No. 3 rear spoiler protector installation surface with a non-residue solvent.
(b) Apply primer to the No. 3 rear spoiler protector installation area on the rear spoiler cover.
NOTICE:
Apply primer evenly so that there are no uncoated areas.
(c) Remove the peeling paper on a new No. 3 rear spoiler protector while making sure not to touch the adhesive surface.
(d) Install the 2 No. 3 rear spoiler protectors as shown in the illustration.
NOTICE:
-
Press the double-sided tape on the No. 3 rear spoiler protector firmly to attach.
-
After the primer dries (3 minutes or more), install the No. 3 rear spoiler protector.
-
After applying primer, reapply primer after 24 hours elapse.
|
|
7. INSTALL NO. 2 REAR SPOILER PROTECTOR
HINT:
When installing the No. 2 rear spoiler protectors, heat the rear spoiler cover using a heat light.
CAUTION:
-
Do not touch the heat light and heated parts, touching the heat light may result in burns.
-
Touching heated parts for a long time may result in burns.
Standard:
Item
|
Temperature
|
Rear spoiler cover
|
20 to 30°C (68 to 86°F)
|
NOTICE:
Do not heat the rear spoiler cover excessively.
(a) Clean the No. 2 rear spoiler protector installation surface with a non-residue solvent.
(b) Apply primer to the No. 2 rear spoiler protector installation area on the rear spoiler cover.
NOTICE:
Apply primer evenly so that there are no uncoated areas.
(c) Remove the peeling paper on a new No. 2 rear spoiler protector while making sure not to touch the adhesive surface.
(d) Install the No. 2 rear spoiler protector as shown in the illustration.
NOTICE:
-
Press the double-sided tape on the No. 2 rear spoiler protector firmly to attach.
-
After the primer dries (3 minutes or more), install the No. 2 rear spoiler protector.
-
After applying primer, reapply primer after 24 hours elapse.
|
|
8. INSTALL NO. 2 REAR SPOILER PROTECTOR
HINT:
When installing the No. 2 rear spoiler protector, heat the rear spoiler cover using a heat light.
CAUTION:
-
Do not touch the heat light and heated parts, touching the heat light may result in burns.
-
Touching heated parts for a long time may result in burns.
Standard:
Item
|
Temperature
|
Rear spoiler cover
|
20 to 30°C (68 to 86°F)
|
NOTICE:
Do not heat the rear spoiler cover excessively.
(a) Clean the No. 2 rear spoiler protector installation surface with a non-residue solvent.
(b) Apply primer to the No. 2 rear spoiler protector installation area on the rear spoiler cover.
NOTICE:
Apply primer evenly so that there are no uncoated areas.
(c) Remove the peeling paper on a new No. 2 rear spoiler protector while making sure not to touch the adhesive surface.
(d) Install the 2 No. 2 rear spoiler protectors as shown in the illustration.
NOTICE:
-
Press the double-sided tape on the No. 2 rear spoiler protector firmly to attach.
-
After the primer dries (3 minutes or more), install the No. 2 rear spoiler protector.
-
After applying primer, reapply primer after 24 hours elapse.
|
|
9. INSTALL NO. 2 REAR SPOILER PROTECTOR
HINT:
When installing the No. 2 rear spoiler protector, heat the rear spoiler cover using a heat light.
CAUTION:
-
Do not touch the heat light and heated parts, touching the heat light may result in burns.
-
Touching heated parts for a long time may result in burns.
Standard:
Item
|
Temperature
|
Rear spoiler cover
|
20 to 30°C (68 to 86°F)
|
NOTICE:
Do not heat the rear spoiler cover excessively.
(a) Clean the No. 2 rear spoiler protector installation surface with a non-residue solvent.
(b) Apply primer to the No. 2 rear spoiler protector installation area on the rear spoiler cover.
NOTICE:
Apply primer evenly so that there are no uncoated areas.
(c) Remove the peeling paper on a new No. 2 rear spoiler protector while making sure not to touch the adhesive surface.
(d) Install the No. 2 rear spoiler protector as shown in the illustration.
NOTICE:
-
Press the double-sided tape on the No. 2 rear spoiler protector firmly to attach.
-
After the primer dries (3 minutes or more), install the No. 2 rear spoiler protector.
-
After applying primer, reapply primer after 24 hours elapse.
|
|
10. INSTALL REAR SPOILER SUB-ASSEMBLY
(a) Clean the attachment surface.
(1) Using an infrared light, heat the double-sided adhesive tape remaining on the back door panel.
Heating Temperature
Item
|
Temperature
|
Vehicle Body
|
40 to 60°C (104 to 140°F)
|
CAUTION:
Do not burn yourself on the hot body panel or with the infrared light.
NOTICE:
Do not heat the vehicle body excessively.
(2) Using a piece of cloth, rub the remaining double-sided tape off the back door panel while it is hot from the infrared light.
NOTICE:
Installing the rear spoiler while any double-sided tape remains on the back door panel may cause adhesion failure. Therefore, completely remove the double-sided adhesive tape.
(3) Using a non-residue solvent, clean the attachment surface.
(b) Engage the 2 clips, pin and install the rear spoiler.
(c) Tighten the 4 bolts.
Torque:
5.9 N·m {60 kgf·cm, 52 in·lbf}
(d) Install the 2 hole plugs.
11. INSTALL BACK DOOR CENTER GARNISH
|