DESCRIPTIONThe main body ECU controls the operation of the TAIL relay. WIRING DIAGRAMCAUTION / NOTICE / HINTNOTICE: Inspect the fuses for circuits related to this system before performing the following inspection procedure. PROCEDURE
(a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Active Test. (e) Check that the relay operates. Main Body
OK: Taillight relay operates. (Taillights illuminate.)
(b) Measure the voltage according to the value(s) in the table below. Standard Voltage:
Text in Illustration
(a) Temporarily replace the instrument panel junction block assembly with a new or normally functioning one.
(a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Active Test. (e) Check that the relay operates. Main Body
OK: Taillight relay operates. (Taillights illuminate.)
|