Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VKGO
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: LIGHTING (EXT): STOP LIGHT SWITCH: INSTALLATION; 2016 - 2020 MY Sienna [12/2015 -        ]

INSTALLATION

PROCEDURE

1. INSTALL STOP LIGHT SWITCH ASSEMBLY

Text in Illustration

*1

Brake Pedal

*2

Adjuster

*3

Stop Light Switch

(a) Install the stop light switch into the adjuster until it slightly touches the brake pedal.

HINT:

Do not depress the brake pedal.

(1) Make a quarter turn clockwise to install the stop light switch.

Text in Illustration

*1

Shaft

*2

Stop Light Switch

*a

Stop Light Switch Clearance

HINT:

  • Do not depress the brake pedal.
  • The turning torque for installing the stop light switch is as below.

Torque:

1.5 N·m {15 kgf·cm, 13 in·lbf}

or less

(b) Check the stop light switch clearance.

Stop light switch clearance:

0.5 to 2.6 mm (0.020 to 0.102 in.)

(c) Connect the stop light switch connector to the stop light switch.