Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VKG7
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: LIGHTING (EXT): LICENSE PLATE LIGHT ASSEMBLY: REMOVAL; 2016 - 2020 MY Sienna [12/2015 -        ]

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for both the RH and LH sides.
  • The procedure described below is for the LH side.

PROCEDURE

1. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; EXTERIOR PANELS / TRIM: BACK DOOR GARNISH: REMOVAL )

2. REMOVE LICENSE PLATE LIGHT ASSEMBLY

(a) Disconnect the connector.

(b) Disengage the 2 claws and remove the license plate light.

3. REMOVE LICENSE PLATE LIGHT BULB

(a) Turn the license plate light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

(b) Remove license plate light bulb from the light socket.