Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VKDN
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: WIPER / WASHER: REAR WIPER MOTOR: INSPECTION; 2016 - 2020 MY Sienna [12/2015 -        ]

INSPECTION

PROCEDURE

1. INSPECT REAR WIPER MOTOR AND BRACKET ASSEMBLY

(a) Check the wiper intermittent operation.

Text in Illustration

*a

Component without harness connected

(Rear Wiper Motor and Bracket Assembly)

(1) Connect a battery positive (+) lead to terminal 4 (+B), and a negative (-) lead to terminal 2 (C1) and terminal 5 (E), and check that the motor operates.

OK:

Motor operates.

If the result is not as specified, replace the rear wiper motor and bracket assembly.

(b) Check the wiper continuous operation.

Text in Illustration

*a

Component without harness connected

(Rear Wiper Motor and Bracket Assembly)

(1) Connect a battery positive (+) lead to terminal 4 (+B), and a negative (-) lead to terminal 3 (LS) and terminal 5 (E), and check that the motor operates.

OK:

Motor operates.

If the result is not as specified, replace the rear wiper motor and bracket assembly.