| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VKDB |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 11/2017] |
| Title: MIRROR (EXT): OUTER REAR VIEW MIRROR: REMOVAL; 2016 - 2017 MY Sienna [12/2015 - 11/2017] | ||
REMOVAL
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.
PROCEDURE
1. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY
HINT:
Use the same procedure as for the RH side (See page
![2016 - 2017 MY Sienna [12/2015 - 11/2017]; DOOR / HATCH: FRONT DOOR: DISASSEMBLY+](/t3Portal/stylegraphics/info.gif)
).
2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG
HINT:
Use the same procedure as for the RH side (See page
).
3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH
HINT:
Use the same procedure as for the RH side (See page
).
4. REMOVE FRONT DOOR NO. 1 STIFFENER CUSHION
HINT:
Use the same procedure as for the RH side (See page
).
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY
HINT:
Use the same procedure as for the RH side (See page
).
6. SEPARATE FRONT DOOR SERVICE HOLE COVER
|
(a) Separate the front door service hole cover to the extent that the outer rear view mirror connector can be disconnected. |
|
7. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY
|
(a) Disconnect the connector. |
|
(b) Remove the 3 nuts.
(c) Disengage the claw and remove the outer rear view mirror.
8. REMOVE OUTER MIRROR GLASS
9. REMOVE OUTER MIRROR LIGHT ASSEMBLY (w/ Seat Position Memory System)
10. REMOVE OUTER MIRROR COVER (w/o HID Headlight System)
|
(a) Disengage the 8 claws and remove the outer mirror cover. |
|
11. REMOVE OUTER MIRROR COVER (w/ HID Headlight System)
|
(a) Disengage the 8 claws and remove the outer mirror cover. |
|
12. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY (w/ HID Headlight System)
|
|