| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VK9W |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: DOOR / HATCH: POWER SLIDE DOOR TOUCH SENSOR: REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE REAR DOOR ARMREST BASE UPPER PANEL
![2016 - 2017 MY Sienna [12/2015 - 11/2017]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+](/t3Portal/stylegraphics/info.gif)
2. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY
3. REMOVE POWER SLIDE DOOR SENSOR ASSEMBLY
|
(a) Disengage the 2 claws. |
|
(b) Disengage the grommet.
HINT:
If the work is difficult because parts cannot easily be reached, partially peel back the service hole cover just enough to allow access to components.
|
(c) Disengage the 3 clips and remove the power slide door sensor. |
|
|
|