Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VK9S |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: DOOR / HATCH: POWER BACK DOOR DRIVE UNIT: REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] |
REMOVAL
PROCEDURE
1. REMOVE ROOF HEADLINING REAR GARNISH
2. SEPARATE BACK DOOR WEATHERSTRIP
3. REMOVE BACK DOOR SCUFF PLATE
4. REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH
HINT:
Use the same procedure as for the RH side (See page
).
5. REMOVE REAR DOOR SCUFF PLATE LH
HINT:
Use the same procedure as for the RH side (See page
).
6. SEPARATE SLIDE DOOR WEATHERSTRIP LH
7. REMOVE QUARTER TRIM PANEL ASSEMBLY LH
8. REMOVE REAR NO. 2 WINDOW SIDE GARNISH ASSEMBLY LH
9. REMOVE POWER BACK DOOR ROD
10. REMOVE POWER BACK DOOR UNIT
(a) Disconnect the connector.
|
|
(b) Remove the clip and 4 bolts.
(c) Disengage the guide and remove the power back door unit.
|