| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VK9P |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR: REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE BACK DOOR CENTER GARNISH
![2016 - 2020 MY Sienna [12/2015 - ]; DOOR / HATCH: BACK DOOR: DISASSEMBLY+](/t3Portal/stylegraphics/info.gif)
2. REMOVE POWER BACK DOOR ROD
3. REMOVE BACK DOOR TRIM BOARD ASSEMBLY
4. REMOVE BACK DOOR SIDE GARNISH RH
5. REMOVE BACK DOOR SIDE GARNISH LH
6. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH
|
(a) Disconnect the connector. |
|
(b) Remove the 5 screws.
(c) Disengage the 2 clips and remove the power back door sensor.
7. REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
|
|