| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VK9M |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR: INSTALLATION; 2016 - 2020 MY Sienna [12/2015 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH
|
(a) Install the power back door sensor with the 2 clips and 5 screws. |
|
(b) Connect the connector.
2. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH
HINT:
Use the same procedure as for the LH side
3. INSTALL BACK DOOR SIDE GARNISH LH
![2016 - 2020 MY Sienna [12/2015 - ]; DOOR / HATCH: BACK DOOR: REASSEMBLY+](/t3Portal/stylegraphics/info.gif)
4. INSTALL BACK DOOR SIDE GARNISH RH
5. INSTALL BACK DOOR TRIM BOARD ASSEMBLY
6. INSTALL POWER BACK DOOR ROD
7. INSTALL BACK DOOR CENTER GARNISH
|
|