Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VK7W
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: SLIDING ROOF / CONVERTIBLE: SLIDING ROOF SWITCH ASSEMBLY: REMOVAL; 2016 - 2020 MY Sienna [12/2015 -        ]

REMOVAL

PROCEDURE

1. REMOVE ROOF CONSOLE BOX ASSEMBLY (for Front Side)

(a) Disengage the 2 clips and 2 claws.

NOTICE:

  • Pull down on the sides of the console box, in the locations indicated by the arrows in the illustration, to disengage the clips.
  • Do not pull down on the center portion of the console box. Pulling down on the center portion may cause the console box assembly to distort or crack.

(b) Disconnect the connectors to remove the roof console box assembly.

2. REMOVE ROOF HEADLINING ASSEMBLY (for Rear Side)

(See page 2016 - 2017 MY Sienna [12/2015 - 11/2017]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL 2018 - 2020 MY Sienna [11/2017 -        ]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL )

3. REMOVE SLIDE ROOF MOTOR SWITCH (for Rear Side)

(a) Disconnect the connector.

(b) Disengage the 4 claws and guide to remove the slide roof motor switch.