Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VK6M |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: WINDOW / GLASS: FRONT PASSENGER SIDE POWER WINDOW SWITCH: INSPECTION; 2016 - 2020 MY Sienna [12/2015 - ] |
INSPECTION
PROCEDURE
1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Text in Illustration
*a
|
Component without harness connected
(Power Window Regulator Switch Assembly)
|
Standard Resistance:
Tester Connection
|
Switch Condition
|
Specified Condition
|
5 (UP) - 7 (GND)
|
Auto up or up position
|
Below 7 Ω
|
4 (DOWN) - 7 (GND)
|
Auto down or down position
|
Below 7 Ω
|
8 (AUTO) - 7 (GND)
|
Auto up or auto down position
|
Below 7 Ω
|
5 (UP) - 7 (GND)
|
Free
|
70 kΩ or higher
|
4 (DOWN) - 7 (GND)
|
Free
|
70 kΩ or higher
|
8 (AUTO) - 7 (GND)
|
Free
|
70 kΩ or higher
|
If the result is not as specified, replace the power window regulator switch assembly.
|
|
(b) Check that the LED illuminates.
(1) Apply battery voltage to the power window regulator switch assembly and check that the LED illuminates.
OK:
Measurement Condition
|
Specified Condition
|
Battery positive (+) → 3 (ILL+)
Battery negative (-) → 1 (ILL-)
|
LED illuminates
|
If the result is not as specified, replace the power window regulator switch assembly.
|