| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VK3G |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: HEATING / AIR CONDITIONING: REAR EVAPORATOR TEMPERATURE SENSOR: REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE REAR COOLING UNIT ASSEMBLY
(See page
![2016 MY Sienna [12/2015 - 08/2016]; HEATING / AIR CONDITIONING: REAR AIR CONDITIONING UNIT: REMOVAL](/t3Portal/stylegraphics/info.gif)
)
2. REMOVE REAR BLOWER WITH FAN MOTOR SUB-ASSEMBLY
3. REMOVE BLOWER MOTOR CONTROL
4. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
5. REMOVE REAR NO. 2 COOLING UNIT DAMPER SERVO SUB-ASSEMBLY
6. REMOVE REAR NO. 1 COOLING UNIT DAMPER SERVO SUB-ASSEMBLY
7. DISCONNECT AIR CONDITIONING HARNESS ASSEMBLY
8. REMOVE AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY
9. REMOVE REAR COOLING UNIT EXPANSION VALVE
10. REMOVE REAR EVAPORATOR SUB-ASSEMBLY
11. REMOVE REAR EVAPORATOR TEMPERATURE SENSOR
(a) Disengage the 2 claws and rear evaporator temperature sensor.
|
|