| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VK2P |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: HEATING / AIR CONDITIONING: COMPRESSOR: DISASSEMBLY; 2016 - 2020 MY Sienna [12/2015 - ] | ||
DISASSEMBLY
PROCEDURE
1. REMOVE MAGNETIC CLUTCH ASSEMBLY
|
(a) Place the compressor and magnetic clutch in a vise. |
|
(b) Using SST, hold the magnetic clutch hub.
SST: 09985-00270
(c) Remove the bolt, magnetic clutch hub and magnetic clutch washers.
HINT:
There is no set number of magnetic clutch washers because they are used for adjustment.
|
(d) Using a snap ring expander, remove the snap ring and then remove the magnetic clutch rotor. NOTICE: Take care not to damage the seal cover of the bearing when removing the snap ring. |
|
|
(e) Disconnect the connector. |
|
(f) Disengage the clamp.
(g) Remove the screw and bracket.
|
(h) Using a snap ring expander, remove the snap ring and magnetic clutch stator. |
|
|
|