Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJZB |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: SEAT BELT: SEAT BELT WARNING SYSTEM: DATA LIST / ACTIVE TEST; 2016 - 2020 MY Sienna [12/2015 - ] |
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Data List.
(e) According to the display on the Techstream, read the Data List.
SRS Airbag
Tester Display
|
Measurement Item/Range
|
Normal Condition
|
Diagnostic Note
|
Passenger Classification
|
Front passenger side seat condition /NG, OFF, Child, AF05, AM50 or Fail
|
NG: Data not determined
OFF: Vacant
Child: Child seated
AF05: Adult seated
AM50: Adult seated
Fail: A failure is detected
|
-
|
Left side Buckle SW
|
Driver side seat belt buckle switch/Unset, Set or NG
|
Unset: Driver side seat belt unfastened
Set: Driver side seat belt fastened
NG: Data not determined
|
-
|
Right side Buckle SW
|
Front passenger side seat belt buckle switch/Unset, Set or NG
|
Unset: Front passenger side seat belt unfastened
Set: Front passenger side seat belt fastened
NG: Data not determined
|
-
|
Occupant Detection
Tester Display
|
Measurement Item/Range
|
Normal Condition
|
Diagnostic Note
|
Passenger Buckle SW
|
Front passenger side seat belt buckle switch/Unset, Set or NG
|
Unset: Front passenger side seat belt unfastened
Set: Front passenger side seat belt fastened
NG: Data not determined
|
-
|
Passenger Classification
|
Front passenger side seat condition/CRS, AM50, AF05, Child or OFF
|
CRS: Child restraint system
AM50: Adult seated
AF05: Adult seated
Child: Child seated
OFF: Vacant
|
-
|
Combination Meter
Tester Display
|
Measurement Item/Range
|
Normal Condition
|
Diagnostic Note
|
Driver Side Seatbelt Warning Buzzer
|
Driver side seat belt warning buzzer/ON or OFF
|
Customized value displayed
|
-
|
P-Seatbelt Warning Buzzer
|
Front passenger side seat belt warning buzzer/ON or OFF
|
Customized value displayed
|
-
|
2. ACTIVE TEST
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Combination Meter / Active Test.
(e) According to the display on the Techstream, perform the Active Test.
Combination Meter
Tester Display
|
Test Part
|
Control Range
|
Diagnostic Note
|
Driver Side Seat Belt
|
Driver side seat belt warning light
|
OFF or ON
|
Confirm that the vehicle stopped with the engine idling.
|
|