Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJYQ |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: SEAT: SEAT RAIL: INSTALLATION; 2016 - 2020 MY Sienna [12/2015 - ] |
INSTALLATION
PROCEDURE
1. INSTALL NO. 1 SEAT LEG RH (for Auto Access Seat Type)
(a) Using a T50 "TORX" socket wrench, install the No. 1 seat leg assembly RH with the 3 bolts.
Torque:
45 N·m {455 kgf·cm, 33 ft·lbf}
(b) Install the bolt.
Torque:
41 N·m {414 kgf·cm, 30 ft·lbf}
(c) Engage the 3 clamps and install the seat wire.
(d) Return the floor carpet and engage the clips.
2. INSTALL NO. 1 SEAT LEG LH (for Auto Access Seat Type)
(a) Install the 4 nuts to the bottom of the vehicle to install the No. 1 seat leg assembly LH.
Torque:
45 N·m {455 kgf·cm, 33 ft·lbf}
(b) Return the floor carpet and engage the clips.
3. INSTALL REAR SEAT OUTER TRACK ASSEMBLY RH
(a) Using a T50 "TORX" socket wrench, install the rear seat outer track assembly RH with the 3 bolts.
Torque:
45 N·m {455 kgf·cm, 33 ft·lbf}
(b) Install the bolt.
Torque:
41 N·m {414 kgf·cm, 30 ft·lbf}
(c) Return the floor carpet and engage the clips.
4. INSTALL REAR SEAT OUTER TRACK ASSEMBLY LH
HINT:
Use the same procedure for the RH side and LH side.
5. INSTALL REAR SEAT INNER TRACK ASSEMBLY RH
(a) Install the 4 nuts to the bottom of the vehicle to install the rear seat inner track assembly RH.
Torque:
45 N·m {455 kgf·cm, 33 ft·lbf}
(b) Return the floor carpet and engage the clips.
6. INSTALL REAR SEAT INNER TRACK ASSEMBLY LH
HINT:
Use the same procedure for the RH side and LH side.
7. INSTALL NO. 1 SEAT TRACK LOWER RAIL PROTECTOR
(a) Engage the 8 claws and install the No. 1 seat track lower rail protector.
8. INSTALL NO. 2 SEAT TRACK LOWER RAIL PROTECTOR
(a) Engage the 8 claws and install the No. 2 seat track lower rail protector.
9. INSTALL NO. 1 FRONT SEAT LEG RH
(a) Install the No. 1 front seat leg RH with the 4 nuts.
Torque:
10 N·m {105 kgf·cm, 8 ft·lbf}
10. INSTALL NO. 1 FRONT SEAT LEG LH
(a) 40/40 Tip-up seat type and ottoman seat type:
(1) Install the No. 1 front seat leg LH with the 4 nuts.
Torque:
10 N·m {105 kgf·cm, 8 ft·lbf}
(b) 60/40 Tip-up seat type:
(1) Install the No. 1 front seat leg LH with the 4 nuts.
Torque:
10 N·m {105 kgf·cm, 8 ft·lbf}
11. INSTALL NO. 2 REAR SEAT LEG GARNISH COVER (for Auto Access Seat Type)
(a) Install the No. 2 rear seat leg garnish cover with the 2 clips.
HINT:
Use the same procedure for the LH side and RH side.
12. INSTALL NO. 1 REAR SEAT LEG GARNISH COVER (for Auto Access Seat Type)
(a) Install the No. 1 rear seat leg garnish cover with the 3 clips.
HINT:
Use the same procedure for the LH side and RH side.
13. INSTALL REAR SEAT LEG COVER RH
(a) Engage the 2 clips, guide, claw and install the rear seat leg cover RH.
HINT:
Use the same procedure for the RH side and LH side.
14. INSTALL REAR SEAT LEG COVER LH
(a) Engage the 2 clips, guide and install the rear seat leg cover LH.
HINT:
Use the same procedure for the LH side and RH side.
15. INSTALL FLOOR CARPET MOULDING
(a) Engage the clip and install the floor carpet moulding.
HINT:
Use the same procedure for the other 7 mouldings.
16. INSTALL SEAT BELT ANCHOR COVER
(a) w/ Seat Belt:
(1) Engage the 2 claws and install the seat belt anchor cover.
HINT:
Use the same procedure for the RH side and LH side.
(b) w/o Seat Belt:
(1) Engage the 2 claws and install the seat belt anchor cover.
HINT:
Use the same procedure for the RH side and LH side.
17. INSTALL REAR HEATER AIR OUTLET GRILLE ASSEMBLY
(a) Engage the 2 clips and 2 guides and install the rear heater air outlet grille assembly.
HINT:
Use the same procedure for the RH side and LH side.
18. INSTALL FUEL TANK ASSEMBLY
(a) Install the fuel tank assembly (See page
).
|