| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJYP |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: SEAT: POWER SEAT CONTROL ECU(for Rear No. 2 Seat): REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
![2016 - 2020 MY Sienna [12/2015 - ]; SEAT: REAR POWER SEAT CONTROL SYSTEM: INITIALIZATION](/t3Portal/stylegraphics/info.gif)
).
2. REMOVE REAR NO. 2 SEAT ASSEMBLY LH
(a) Remove the rear No. 2 power seat assembly LH (See page
).
3. REMOVE REAR SEAT RECLINING COVER LH
4. REMOVE REAR SEAT RECLINING COVER RH
5. REMOVE REAR NO. 2 SEAT COVER BEZEL
6. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH
7. SEPARATE REAR SEAT WIRE LH
8. REMOVE NO. 2 SEATBACK FRAME SUB-ASSEMBLY LH
9. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY
10. REMOVE REAR SEAT HEADREST ASSEMBLY
11. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY
12. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY LH
13. REMOVE REAR SEAT WIRE LH
14. REMOVE FOLD SEAT CONTROL ECU
|
(a) Remove the 2 nuts and fold seat control ECU. |
|
15. REMOVE REAR NO. 2 SEAT ASSEMBLY RH
(a) Remove the rear No. 2 power seat assembly RH (See page
).
16. REMOVE REAR SEAT RECLINING COVER LH
17. REMOVE REAR SEAT RECLINING COVER RH
18. REMOVE REAR NO. 2 SEAT COVER BEZEL
19. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH
20. SEPARATE REAR SEAT WIRE RH
21. REMOVE NO. 2 SEATBACK FRAME SUB-ASSEMBLY RH
22. REMOVE REAR SEAT HEADREST ASSEMBLY
23. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY
24. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY RH
25. REMOVE REAR SEAT WIRE RH
26. REMOVE FOLD SEAT CONTROL ECU
|
(a) Remove the 2 nuts and fold seat control ECU. |
|
|
|