| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJY7 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: SEAT: REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type LH Side): REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] | ||
REMOVAL
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
(a) When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
![2016 - 2020 MY Sienna [12/2015 - ]; SEAT: REAR POWER SEAT CONTROL SYSTEM: INITIALIZATION](/t3Portal/stylegraphics/info.gif)
).
2. REMOVE REAR NO. 2 SEAT LEG SIDE GARNISH SUB-ASSEMBLY
|
(a) Disengage the 9 clips and remove the rear No. 2 seat leg side garnish sub-assembly. |
|
3. REMOVE REAR SEAT LEG SIDE GARNISH SUB-ASSEMBLY LH
|
(a) Disengage the 4 clips and 2 claws, and then remove the rear seat leg side garnish sub-assembly LH. |
|
4. REMOVE NO. 2 SEAT HINGE COVER
|
(a) Remove the 2 screws. |
|
(b) Disengage the 6 claws and remove the 2 No. 2 seat hinge covers.
5. REMOVE REAR NO. 2 SEAT ASSEMBLY LH
|
(a) Disconnect the connector. |
|
(b) Disengage the 2 clamps and separate the wire harness.
|
(c) Remove the 4 bolts. |
|
|
(d) Pull the lever under the No. 2 seat cushion and remove the rear No. 2 seat assembly LH. |
|
6. REMOVE REAR NO. 2 SEAT LEG ASSEMBLY LH
|
(a) Remove the 3 bolts and 2 nuts, and then remove the rear No. 2 seat leg assembly LH. |
|
7. REMOVE NO. 1 SEAT LEG BOX PROTECTOR
|
|