Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJY7 |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: SEAT: REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type LH Side): REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] |
REMOVAL
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
(a) When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
).
2. REMOVE REAR NO. 2 SEAT LEG SIDE GARNISH SUB-ASSEMBLY
(a) Disengage the 9 clips and remove the rear No. 2 seat leg side garnish sub-assembly.
|
|
3. REMOVE REAR SEAT LEG SIDE GARNISH SUB-ASSEMBLY LH
(a) Disengage the 4 clips and 2 claws, and then remove the rear seat leg side garnish sub-assembly LH.
|
|
4. REMOVE NO. 2 SEAT HINGE COVER
(b) Disengage the 6 claws and remove the 2 No. 2 seat hinge covers.
5. REMOVE REAR NO. 2 SEAT ASSEMBLY LH
(a) Disconnect the connector.
|
|
(b) Disengage the 2 clamps and separate the wire harness.
(d) Pull the lever under the No. 2 seat cushion and remove the rear No. 2 seat assembly LH.
|
|
6. REMOVE REAR NO. 2 SEAT LEG ASSEMBLY LH
(a) Remove the 3 bolts and 2 nuts, and then remove the rear No. 2 seat leg assembly LH.
|
|
7. REMOVE NO. 1 SEAT LEG BOX PROTECTOR
|