Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJWX |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: SEAT: FRONT SEAT ASSEMBLY(for Power Seat): REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] |
REMOVAL
CAUTION / NOTICE / HINT
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page
).
HINT:
-
Use the same procedure for the LH side and RH side.
-
The procedures listed below are for the LH side.
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
).
2. REMOVE FRONT SEAT HEADREST ASSEMBLY
3. REMOVE FRONT SEAT ASSEMBLY LH
(a) Using a screwdriver with its tip wrapped in protective tape, pry out the 2 seat track covers.
|
|
(b) Disconnect the connectors under the seat.
(c) Remove the 4 bolts and the seat assembly.
NOTICE:
Be careful not to damage the body.
|