Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJWS |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: SEAT: FRONT SEAT ASSEMBLY(for Manual Seat): REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] |
REMOVAL
CAUTION / NOTICE / HINT
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page
).
HINT:
-
Use the same procedure for the LH side and RH side.
-
The procedure listed below is for the LH side.
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
).
2. REMOVE FRONT SEAT ASSEMBLY LH
(a) Using a screwdriver with its tip wrapped in protective tape, pry out the 2 seat track covers.
(b) Disconnect the connectors under the front seat assembly LH.
|
|
(c) Remove the 4 bolts and front seat assembly LH.
NOTICE:
Be careful not to damage the body.
3. REMOVE FRONT SEAT HEADREST ASSEMBLY
(a) Remove the front seat headrest assembly.
|