Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VJWQ
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: SEAT: FRONT SEAT ASSEMBLY(for Manual Seat): INSTALLATION; 2016 - 2020 MY Sienna [12/2015 -        ]

INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page 2016 - 2020 MY Sienna [12/2015 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: PRECAUTION ).

HINT:

  • Use the same procedure for the LH side and RH side.
  • The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL FRONT SEAT HEADREST ASSEMBLY

(a) Install the front seat headrest assembly.

2. INSTALL FRONT SEAT ASSEMBLY LH

(a) Place the front seat assembly LH in the cabin.

NOTICE:

Be careful not to damage the body.

(b) Connect the connectors under the front seat assembly LH.

(c) Install the 2 bolts on the front side of the front seat assembly LH.

Torque:

37 N·m {377 kgf·cm, 27 ft·lbf}

(d) Install the 2 bolts on the rear side of the front seat assembly LH.

Torque:

37 N·m {377 kgf·cm, 27 ft·lbf}

(e) Install the 2 seat track covers.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page 2016 MY Sienna [12/2015 - 08/2016]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2017 MY Sienna [08/2016 - 11/2017]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2018 - 2020 MY Sienna [11/2017 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION ).

4. CHECK SRS WARNING LIGHT

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DIAGNOSIS SYSTEM )