| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJTO |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 11/2017] |
| Title: PRE-COLLISION: PRE-COLLISION BRAKE CANCEL SWITCH: INSPECTION; 2016 - 2017 MY Sienna [12/2015 - 11/2017] | ||
INSPECTION
PROCEDURE
1. INSPECT PRE-COLLISION BRAKE CANCEL SWITCH ASSEMBLY
(a) Check the resistance of the pre-collision brake cancel switch.
Text in Illustration
|
*a |
Component without harness connected (Pre-collision Brake Cancel Switch Assembly) |
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Switch Condition |
Specified Condition |
|---|---|---|
|
1 - 2 |
on (Pressed) |
Below 1 Ω |
|
off (Not pressed) |
10 kΩ or higher |
If the result is not as specified, replace the pre-collision brake cancel switch.
|
|