Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJTM |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 11/2017] |
Title: PRE-COLLISION: SEAT BELT CONTROL ECU: REMOVAL; 2016 - 2017 MY Sienna [12/2015 - 11/2017] |
REMOVAL
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
).
2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH
(See page
)
3. REMOVE COWL SIDE TRIM BOARD RH
(See page
)
4. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
5. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
(See page
)
6. REMOVE ECU INTEGRATION BOX RH
(See page
)
7. REMOVE SEAT BELT CONTROL ECU
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the seat belt control ECU.
Text in Illustration
|