| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJT2 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 11/2017] |
| Title: PRE-COLLISION: PRE-COLLISION SYSTEM: DTC CHECK / CLEAR; 2016 - 2017 MY Sienna [12/2015 - 11/2017] | ||
DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.
(e) Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
(f) Check the details of the DTC(s) (See page
![2016 - 2017 MY Sienna [12/2015 - 11/2017]; PRE-COLLISION: PRE-COLLISION SYSTEM: DIAGNOSTIC TROUBLE CODE CHART](/t3Portal/stylegraphics/info.gif)
).
HINT:
As the driving support ECU and seat belt control ECU output DTCs for the pre-collision system, be sure to check the Pre-Collision and Pre-Collision 2 DTCs.
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.
(e) Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
(f) Clear the DTCs.
HINT:
As the driving support ECU and seat belt control ECU output DTCs for the pre-collision system, be sure to clear the Pre-Collision and Pre-Collision 2 DTCs.
|
|