Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJRG |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: B1695/16,B1697/82; Door Side Airbag Sensor LH Malfunction; 2016 - 2020 MY Sienna [12/2015 - ] |
DTC
|
B1695/16
|
Door Side Airbag Sensor LH Malfunction
|
DTC
|
B1697/82
|
Lost Communication with Door Side Airbag Sensor LH
|
DESCRIPTION
for DTC B1695/16:
The side airbag sensor LH consists of the safing sensor, the diagnostic circuit, the lateral deceleration sensor, etc.
If the center airbag sensor assembly receives signals from the lateral deceleration sensor, it determines whether the SRS should be activated.
DTC B1695/16 is recorded when a malfunction is detected in the side airbag sensor LH circuit.
for DTC B1697/82:
The circuit for the side collision sensor LH (to determine deployment of the front seat side airbag assembly LH and curtain shield airbag assembly LH) is composed of the center airbag sensor assembly, side airbag sensor LH and rear airbag sensor LH.
The side airbag sensor LH and rear airbag sensor LH detect impacts to the vehicle and send signals to the center airbag sensor assembly to determine if the airbag should be deployed.
DTC B1697/82 is recorded when a malfunction is detected in the circuit for the side collision sensor LH (to determine deployment of the front seat side airbag assembly LH and curtain shield airbag assembly LH).
DTC No.
|
DTC Detection Condition
|
Trouble Area
|
B1695/16
B1697/82
|
When one of following conditions is met:
-
Side airbag sensor LH malfunction
-
Center airbag sensor assembly malfunction
|
-
Side airbag sensor LH
-
Center airbag sensor assembly
|
WIRING DIAGRAM
PROCEDURE
1.
|
CHECK SIDE AIRBAG SENSOR LH
|
(a) Turn the ignition switch off.
(b) Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.
(c) Interchange the side airbag sensor LH with RH and connect the connectors to them.
(d) Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.
(e) Turn the ignition switch to ON, and wait for at least 60 seconds.
(f) Clear the DTCs stored in the memory (See page
).
(g) Turn the ignition switch off.
(h) Turn the ignition switch to ON, and wait for at least 60 seconds.
(i) Check for DTCs (See page
).
Result
Result
|
Proceed to
|
DTC B1690/15, B1692/81, B1695/16 and B1697/82 are not output.
|
A
|
DTC B1695/16 or B1697/82 is output.
|
B
|
DTC B1690/15 or B1692/81 is output.
|
C
|
Text in Illustration
*1
|
Side Airbag Sensor RH
|
*2
|
Center Airbag Sensor Assembly
|
HINT:
DTCs other than B1690/15, B1692/81, B1695/16 and B1697/82 may be output at this time, but they are not related to this check.
(j) Turn the ignition switch off.
(k) Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
(l) Return the side airbag sensor RH and LH to their original positions and connect the connectors to them.
|