Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VJR5
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: B1610/13; Front Airbag Sensor RH Malfunction; 2016 - 2020 MY Sienna [12/2015 -        ]

DTC

B1610/13

Front Airbag Sensor RH Malfunction

DESCRIPTION

The front airbag sensor RH consists of the diagnostic circuit, the frontal deceleration sensor, etc.

If the center airbag sensor assembly receives signals from the frontal deceleration sensor, it determines whether the SRS should be activated.

DTC B1610/13 is recorded when a malfunction is detected in the front airbag sensor RH circuit.

DTC No.

DTC Detection Condition

Trouble Area

B1610/13

When one of following conditions is met:

  • Front airbag sensor RH malfunction
  • Center airbag sensor assembly malfunction
  • Front airbag sensor RH
  • Center airbag sensor assembly

WIRING DIAGRAM

PROCEDURE

1.

CHECK FRONT AIRBAG SENSOR RH

(a) Turn the ignition switch off.

(b) Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.

(c) Interchange the front airbag sensor LH with RH and connect the connectors to them.

(d) Connect the cable to the negative battery terminal, and wait for at least 2 seconds.

(e) Turn the ignition switch to ON, and wait for at least 60 seconds.

(f) Clear the DTCs stored in the memory (See page 2016 - 2020 MY Sienna [12/2015 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DTC CHECK / CLEAR ).

(g) Turn the ignition switch off.

(h) Turn the ignition switch to ON, and wait for at least 60 seconds.

(i) Check for DTCs (See page 2016 - 2020 MY Sienna [12/2015 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DTC CHECK / CLEAR ).

Result

Result

Proceed to

DTC B1610/13 is output.

A

DTC B1615/14 is output.

B

DTC B1610/13 and B1615/14 are not output.

C

Text in Illustration

*1

Front Airbag Sensor LH

*2

Center Airbag Sensor Assembly

HINT:

DTCs other than B1610/13 and B1615/14 may be output at this time, but they are not related to this check.

A

REPLACE CENTER AIRBAG SENSOR ASSEMBLY

B

REPLACE FRONT AIRBAG SENSOR RH

C

USE SIMULATION METHOD TO CHECK