Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJP5 |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION; 2016 - 2020 MY Sienna [12/2015 - ] |
INSTALLATION
CAUTION / NOTICE / HINT
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page
).
PROCEDURE
1. INSTALL INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY
(a) Check that the ignition switch is off.
(b) Check that the cable is disconnected from the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
(c) Engage the 6 hooks to install the instrument panel passenger without door airbag assembly.
(d) Install the 2 screws.
2. INSTALL NO. 2 INSTRUMENT PANEL WIRE
(a) Connect the 2 airbag connectors.
Text in Illustration
NOTICE:
-
Do not damage the airbag wire harness when connecting the airbag connector.
-
Be sure to only connect the connectors to each corresponding color.
-
Securely lock the locking button.
|
|
(b) Engage the hook.
3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
(See page
)
4. INSPECT SRS WARNING LIGHT
(See page
)
|