| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJOU |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: ON-VEHICLE INSPECTION; 2016 - 2020 MY Sienna [12/2015 - ] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT STEERING PAD (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check (See page
![2016 - 2020 MY Sienna [12/2015 - ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DTC CHECK / CLEAR](/t3Portal/stylegraphics/info.gif)
).
(b) Visually check for defects with the steering pad installed on the vehicle.
HINT:
The defects are as follows:
- Cuts on the surface or in the grooves
- Small cracks on the surface or in the grooves
- Significant discoloration on the surface or in the grooves
OK:
No defects are found.
2. INSPECT STEERING PAD (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check (See page
).
(b) Visually check for defects with the steering pad removed from the vehicle.
HINT:
The defects are as follows:
- Cuts on the surface or in the grooves
- Small cracks on the surface or in the grooves
- Significant discoloration on the surface or in the grooves
- Cracks or other damage to the connector
- Deformation of the steering wheel assembly
- Deformation of the installation surface of the steering pad
- Interference or uneven clearance between the steering pad and steering wheel assembly when a new steering pad is installed on the steering wheel assembly
OK:
No defects are found.
If any defects are found, replace the steering pad or steering wheel assembly with a new one.
|
|