Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VJNH
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: LIGHTING (INT): LIGHTING SYSTEM: CUSTOMIZE PARAMETERS; 2016 - 2020 MY Sienna [12/2015 -        ]

CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Connect the Techstream to the DLC3.

(1) Turn the ignition switch to ON.

(2) Turn the Techstream on.

(3) Enter the following menus: Customize Setting / Illuminated Entry.

(4) Select the setting by referring to the table below.

Illuminated Entry

Display

Default

Contents

Setting

Relevant ECU

Lighting Time

15 s

Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the ignition switch from off to ACC or ON.)

7.5 s, 15 s or 30 s

Main Body ECU

I/L when ACC OFF

ON

Lights up the transponder key amplifier*1, engine switch illumination*2, No. 2 room light assembly*3, spot light assembly*4 and roof console box assembly when the ignition switch is turned from ACC or ON to off.

ON or OFF

Main Body ECU

I/L ON W/Door Key Unlock

ON

Lights up the transponder key amplifier*1, engine switch illumination*2, No. 2 room light assembly*3, spot light assembly*4 and roof console box assembly when doors are unlocked using a mechanical key or door control transmitter.

ON or OFF

Main Body ECU

Room Light when Aprchd*2

ON

Lights up the engine switch illumination, No. 2 room light assembly*3, spot light assembly*4 and roof console box assembly when the key enters any actuation area around the doors.

ON or OFF

Main Body ECU

Illumination System

ON

Light up the ceiling light when one of the following occurs; the ignition turned ON, door unlock or door open.

ON or OFF

Main Body ECU

Light Control

OFF

Light up the ceiling light when the ignition switch is ON and the shift lever is not P.

ON or OFF

Main Body ECU

Interior Light Control

ON

Change the interior lights (transponder key amplifier*1, engine switch illumination*2, No. 2 room light assembly*3, spot light assembly*4 and roof console box assembly) control.

ON or OFF

Main Body ECU

  • *1: w/o Smart Key System
  • *2: w/ Smart Key System
  • *3: w/o Rear Sliding Roof
  • *4: w/ Rear Sliding Roof

(b) Customizing using the radio and display receiver assembly*1 or navigation receiver assembly*2.

  • *1: for Radio and Display Type
  • *2: for Navigation Receiver Type

(1) Turn the ignition switch to ON.

(2) Enter the following menus: SETUP / Vehicle / Vehicle Customization / Lights Settings.

(3) Select the setting by referring to the table below.

Lights Settings

Display

Default

Content

Setting

Relevant ECU

Interior Lights Off Timer

15 sec.

Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the ignition switch from off to ACC or ON.)

7.5 sec., 15 sec. or 30 sec.

Main Body ECU