- ON: DOME CUT relay off (interior lights turn off)
- OFF: DOME CUT relay on (interior lights turn on)
| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJNG |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: LIGHTING (INT): LIGHTING SYSTEM: DATA LIST / ACTIVE TEST; 2016 - 2020 MY Sienna [12/2015 - ] | ||
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuator and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Data List.
(e) According to the display on the Techstream, read the Data List.
Main Body
|
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
Key Unlock Warning SW*1 |
Key unlock warning switch signal/ON or OFF |
ON: Key in ignition key cylinder OFF: No key in ignition key cylinder |
- |
|
ACC SW |
Ignition switch or engine switch ACC signal/ON or OFF |
ON: Ignition switch ACC or ON OFF: Ignition switch off or START |
- |
|
IG SW |
Ignition switch or engine switch IG signal/ON or OFF |
ON: Ignition switch ON or START OFF: Ignition switch off or ACC |
- |
|
RR Door Courtesy SW |
Rear door courtesy light switch RH signal/ON or OFF |
ON: Rear door RH open OFF: Rear door RH closed |
- |
|
RL Door Courtesy SW |
Rear door courtesy light switch LH signal/ON or OFF |
ON: Rear door LH open OFF: Rear door LH closed |
- |
|
Back Door Courtesy SW |
Back door courtesy switch signal/ON or OFF |
ON: Back door open OFF: Back door closed |
- |
|
FR Door Lock Pos |
Front door unlock detection switch RH signal/UNLOCK or LOCK |
UNLOCK: Front door RH unlocked LOCK: Front door RH locked |
- |
|
FR Door Courtesy |
Front door courtesy light switch RH signal/ON or OFF |
ON: Front door RH closed OFF: Front door RH open |
- |
|
FL Door Lock Pos |
Front door unlock detection switch LH signal/UNLOCK or LOCK |
UNLOCK: Front door LH unlocked LOCK: Front door LH locked |
- |
|
FL Door Courtesy |
Front door courtesy light switch LH signal/ON or OFF |
ON: Front door LH closed OFF: Front door LH open |
- |
|
RR-Door Lock Pos SW |
Rear door unlock detection switch RH signal/ON or OFF |
ON: Rear door RH unlocked OFF: Rear door RH locked |
- |
|
RL-Door Lock Pos SW |
Rear door unlock detection switch LH signal/ON or OFF |
ON: Rear door LH unlocked OFF: Rear door LH locked |
- |
- *1: w/o Smart Key System
2. ACTIVE TEST
HINT:
Using Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body or Smart Key*2 / Active Test.
(e) According to the display on the Techstream, perform the Active Test.
Main Body
|
Tester Display |
Test Part |
Control Range |
Diagnostic Note |
|---|---|---|---|
|
Illuminated Entry System |
Transponder key amplifier*1, engine switch illumination*2, roof console box assembly, No. 2 room light assembly*3, spot light assembly*4 and ceiling light*4 |
ON/OFF |
Interior light switch in DOOR position and all doors closed |
|
Ceiling Light |
Ceiling light |
ON/OFF |
- |
|
Relay for Interior Light Auto Cut Function |
DOME CUT relay |
ON/OFF |
When performing this Active Test, turn on each interior lights. |
- *1: w/o Smart Key System
- *2: w/ Smart Key System
- *3: w/o Rear Sliding Roof
- *4: w/ Rear Sliding Roof
Smart Key*1
|
Tester Display |
Test Part |
Control Range |
Diagnostic Note |
|---|---|---|---|
|
Power/Engine SW Light |
Engine switch illumination |
ON/OFF |
All doors closed |
- *1: w/ Smart Key System
|
|