Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VJME
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: LIGHTING (INT): FRONT DOOR COURTESY SWITCH: REMOVAL; 2016 - 2020 MY Sienna [12/2015 -        ]

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for both the RH and LH sides.
  • The procedure described below is for the LH side.

PROCEDURE

1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

HINT:

Use the same procedure as for the RH side (See page 2016 - 2017 MY Sienna [12/2015 - 11/2017]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+ 2018 - 2020 MY Sienna [11/2017 -        ]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+ ).

2. REMOVE REAR DOOR SCUFF PLATE LH

HINT:

Use the same procedure as for the RH side (See page 2016 - 2017 MY Sienna [12/2015 - 11/2017]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+ 2018 - 2020 MY Sienna [11/2017 -        ]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+ ).

3. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

4. SEPARATE SLIDE DOOR WEATHERSTRIP LH

5. REMOVE CENTER PILLAR LOWER GARNISH LH

HINT:

Use the same procedure as for the RH side (See page 2016 - 2017 MY Sienna [12/2015 - 11/2017]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+ 2018 - 2020 MY Sienna [11/2017 -        ]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+ ).

6. REMOVE COURTESY LIGHT SWITCH

(a) Using a T30 "TORX" socket wrench, remove the screw.

(b) Disconnect the connector and remove the courtesy light switch.