| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJJ1 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 11/2017] |
| Title: THEFT DETERRENT / KEYLESS ENTRY: CERTIFICATION ECU: INSTALLATION; 2016 - 2017 MY Sienna [12/2015 - 11/2017] | ||
INSTALLATION
PROCEDURE
1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
|
(a) Engage the 2 claws and install the certification ECU. |
|
2. INSTALL ECU INTEGRATION BOX RH
(a) Install the ECU integration box with the 2 nuts and bolt.
(b) Engage the clamp.
HINT:
If the vehicle is equipped with a wire harness clamp, engage the clamp.
(c) Connect each connector.
3. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
(See page
![2016 - 2017 MY Sienna [12/2015 - 11/2017]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
)
4. INSTALL COWL SIDE TRIM BOARD RH
(See page
)
5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
6. INSTALL DOOR SCUFF PLATE ASSEMBLY RH
(See page
)
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque:
5.4 N·m {55 kgf·cm, 48 in·lbf}
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
).
8. REGISTER KEY
NOTICE:
When replacing the certification ECU (smart key ECU assembly), perform registration (See page
).
9. REGISTER ECU COMMUNICATION ID
NOTICE:
When replacing the certification ECU (smart key ECU assembly), perform registration (See page
).
|
|