Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VJIG
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR(for Rear Floor): REMOVAL; 2016 - 2020 MY Sienna [12/2015 -        ]

REMOVAL

PROCEDURE

1. REMOVE REAR NO. 2 SEAT (for Manual Seat Type LH Side)

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; SEAT: REAR NO. 2 SEAT ASSEMBLY(for Manual Seat Type LH Side): REMOVAL )

2. REMOVE REAR NO. 2 SEAT (for Manual Seat Type RH Side)

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; SEAT: REAR NO. 2 SEAT ASSEMBLY(for Manual Seat Type RH Side): REMOVAL )

3. REMOVE REAR NO. 2 SEAT (for Power Seat Type LH Side)

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; SEAT: REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type LH Side): REMOVAL )

4. REMOVE REAR NO. 2 SEAT (for Power Seat Type RH Side)

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; SEAT: REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type RH Side): REMOVAL )

5. REMOVE REAR HEATER AIR OUTLET GRILLE ASSEMBLY

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; SEAT: SEAT RAIL: REMOVAL+ )

6. REMOVE ELECTRICAL KEY OSCILLATOR

(a) Peel back the floor carpet.

(b) Disconnect the connector.

(c) Disengage the 2 clamps and remove the electrical key oscillator.

NOTICE:

Be careful when removing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.