Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJFV |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 11/2017] |
Title: DOOR LOCK: SLIDE DOOR LOCK: REMOVAL; 2016 - 2017 MY Sienna [12/2015 - 11/2017] |
REMOVAL
PROCEDURE
1. REMOVE REAR DOOR ARMREST BASE UPPER PANEL
2. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY
3. REMOVE REAR DOOR GLASS WEATHERSTRIP INNER WITH GARNISH
4. REMOVE SLIDE DOOR HANDLE ASSEMBLY (w/o Power Slide Door)
(a) Disconnect the connector.
|
|
(b) Remove the 3 bolts.
(c) Disengage the guide.
(d) Disconnect the 4 cables and remove the slide door handle.
|
|
5. REMOVE SLIDE DOOR HANDLE ASSEMBLY (w/ Power Slide Door)
(a) Disconnect the 2 connectors.
|
|
(b) Remove the 3 bolts.
(c) Disengage the guide.
(d) Disconnect the 5 cables and remove the slide door lock handle.
|
|
6. REMOVE REAR DOOR SCUFF PLATE
7. REMOVE QUARTER TRIM COVER HOLE
8. REMOVE REAR DOOR WIRE (w/o Power Slide Door)
9. REMOVE REAR DOOR WIRE (w/ Power Slide Door)
10. REMOVE QUARTER WINDOW GLASS (w/ Power Slide Door)
(See page
)
11. REMOVE SLIDE RAIL END MOULDING (w/ Power Slide Door)
12. REMOVE POWER SLIDE DOOR MOTOR UNIT (w/ Power Slide Door)
13. REMOVE SLIDE DOOR SERVICE HOLE COVER
14. REMOVE REAR DOOR WINDOW FRAME REAR MOULDING
HINT:
Use the same procedure as for the LH side (See page
).
15. REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
HINT:
Use the same procedure as for the LH side (See page
).
16. REMOVE REAR DOOR GLASS RUN
17. REMOVE NO. 2 REAR DOOR GLASS RUN
18. REMOVE REAR DOOR GLASS SUB-ASSEMBLY
19. REMOVE REAR DOOR WINDOW REAR LOWER FRAME SUB-ASSEMBLY
20. REMOVE REAR DOOR INSIDE LOCKING LINK PROTECTOR
21. REMOVE SLIDE DOOR FRONT LOCK ASSEMBLY
(b) Disconnect the rod.
(c) Using a T30 "TORX" socket wrench, remove the 3 screws and slide door front lock.
22. REMOVE SLIDE DOOR REAR LOCK ASSEMBLY (w/o Power Slide Door)
(a) Disengage the 2 clamps.
|
|
(b) Using a T30 "TORX" socket wrench, remove the 3 screws and slide door rear lock.
23. REMOVE POWER SLIDE DOOR LOCK ASSEMBLY (w/ Power Slide Door)
(a) Disengage the 2 clamps.
|
|
(b) Remove the bolt.
(c) Using a T30 "TORX" socket wrench, remove the 3 screws and power slide door lock.
|