| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJFL |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: DOOR LOCK: UNLOCK WARNING SWITCH: INSPECTION; 2016 - 2020 MY Sienna [12/2015 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT UNLOCK WARNING SWITCH
(a) Check the resistance.
Text in Illustration
|
*a |
Component without harness connected (Unlock Warning Switch) |
|
*b |
Free |
|
*c |
Push |
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Switch Condition |
Specified Condition |
|---|---|---|
|
1 (UN+) - 2 (UN-) |
Pin released (Free) |
10 kΩ or higher |
|
1 (UN+) - 2 (UN-) |
Pin pushed in |
Below 1 Ω |
If the result is not as specified, replace the unlock warning switch.
|
|