Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJFL |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: DOOR LOCK: UNLOCK WARNING SWITCH: INSPECTION; 2016 - 2020 MY Sienna [12/2015 - ] |
INSPECTION
PROCEDURE
1. INSPECT UNLOCK WARNING SWITCH
(a) Check the resistance.
Text in Illustration
*a
|
Component without harness connected
(Unlock Warning Switch)
|
*b
|
Free
|
*c
|
Push
|
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Switch Condition
|
Specified Condition
|
1 (UN+) - 2 (UN-)
|
Pin released (Free)
|
10 kΩ or higher
|
1 (UN+) - 2 (UN-)
|
Pin pushed in
|
Below 1 Ω
|
If the result is not as specified, replace the unlock warning switch.
|