Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJFE |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: DOOR LOCK: TRANSMITTER BATTERY(w/o Smart Key System): REPLACEMENT; 2016 - 2020 MY Sienna [12/2015 - ] |
REPLACEMENT
PROCEDURE
1. REMOVE TRANSMITTER HOUSING COVER
(a) Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter housing cover.
Text in Illustration
NOTICE:
Do not use excessive force when prying apart the housing cover.
|
|
2. REMOVE TRANSMITTER BATTERY
(a) Remove the battery (lithium battery).
NOTICE:
-
Do not push the terminals with your finger.
-
Do not forcibly pry up the battery (lithium battery). The terminals may be damaged.
-
Do not touch the battery with wet hands. Water may cause rust.
-
Do not touch or move any components inside the transmitter. It may interfere with proper operation.
|
|
3. INSTALL TRANSMITTER BATTERY
(a) Install a battery (lithium battery) with the positive (+) side up, as shown in the illustration.
NOTICE:
-
Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.
-
Do not bend the transmitter battery electrode during insertion.
-
Keep the transmitter cover interior free of dust and oil.
|
|
4. INSTALL TRANSMITTER HOUSING COVER
(a) Install the transmitter housing cover onto the transmitter housing case securely.
|
|
|