Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJFC |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 11/2017] |
Title: NETWORKING: NETWORK GATEWAY ECU: REMOVAL; 2016 - 2017 MY Sienna [12/2015 - 11/2017] |
REMOVAL
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
).
2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH
3. REMOVE COWL SIDE TRIM BOARD RH
4. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
5. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
6. REMOVE ECU INTEGRATION BOX RH
7. REMOVE NETWORK GATEWAY ECU
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the network gateway ECU.
Text in Illustration
|