| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJDD |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 11/2017] |
| Title: POWER DISTRIBUTION: POWER MANAGEMENT CONTROL ECU: REMOVAL; 2016 - 2017 MY Sienna [12/2015 - 11/2017] | ||
REMOVAL
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
![2016 MY Sienna [12/2015 - 08/2016]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION](/t3Portal/stylegraphics/info.gif)
).
2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH
3. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
4. REMOVE COWL SIDE TRIM BOARD RH
5. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
6. REMOVE ECU INTEGRATION BOX RH
7. REMOVE POWER MANAGEMENT CONTROL ECU
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the power management control ECU.
Text in Illustration
|
*1 |
Protective Tape |
|
|