Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VJDB
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 11/2017]
Title: POWER DISTRIBUTION: POWER MANAGEMENT CONTROL ECU: INSTALLATION; 2016 - 2017 MY Sienna [12/2015 - 11/2017]

INSTALLATION

PROCEDURE

1. INSTALL POWER MANAGEMENT CONTROL ECU

(a) Engage the 2 claws and install the power management control ECU.

2. INSTALL ECU INTEGRATION BOX RH

2016 - 2017 MY Sienna [12/2015 - 11/2017]; THEFT DETERRENT / KEYLESS ENTRY: CERTIFICATION ECU: INSTALLATION+

3. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY

2016 - 2017 MY Sienna [12/2015 - 11/2017]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION+

4. INSTALL COWL SIDE TRIM BOARD RH

2016 - 2017 MY Sienna [12/2015 - 11/2017]; INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION+

5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

6. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

2016 - 2017 MY Sienna [12/2015 - 11/2017]; INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION+

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page 2016 MY Sienna [12/2015 - 08/2016]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2017 MY Sienna [08/2016 - 11/2017]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION ).