| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJC0 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: B15A8; Telematics Transceiver Malfunction; 2016 - 2020 MY Sienna [12/2015 - ] | ||
|
DTC |
B15A8 |
Telematics Transceiver Malfunction |
DESCRIPTION
This DTC is set when an error in the EEPROM or PLL IC is detected on the DCM (Telematics Transceiver) self-check. The EEPROM (Electrically Erasable Programmable Read-Only Memory) stores the various data to operate the Safety Connect system. The PLL IC (Phase-Locked Loop Integrated Circuit) oscillates telephone radio frequency.
|
DTC No. |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
B15A8 |
Error in EEPROM or PLL IC is detected. |
DCM (Telematics Transceiver) |
CAUTION / NOTICE / HINT
NOTICE:
Regardless of whether DTC B15A8 has been output as a present DTC, the DCM (Telematics Transceiver) should be replaced.
PROCEDURE
|
1. |
REPLACE DCM (TELEMATICS TRANSCEIVER) |
(a) Replace the DCM (Telematics Transceiver) (See page
![2016 - 2017 MY Sienna [12/2015 - 11/2017]; CELLULAR COMMUNICATION: MAYDAY ECU: REMOVAL](/t3Portal/stylegraphics/info.gif)
).
NOTICE:
- The ignition switch must be off.
- Do not swap the DCM (Telematics Transceiver) with one from another vehicle.
| NEXT |
|
PERFORM DCM ACTIVATION (See page
|
|
|