| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJBI |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 11/2017] |
| Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SENSOR: REMOVAL; 2016 - 2017 MY Sienna [12/2015 - 11/2017] | ||
REMOVAL
PROCEDURE
1. REMOVE REAR BUMPER COVER
(See page
![2016 MY Sienna [12/2015 - 08/2016]; EXTERIOR PANELS / TRIM: REAR BUMPER: REMOVAL](/t3Portal/stylegraphics/info.gif)
)
2. REMOVE BLIND SPOT MONITOR COVER LH
|
(a) Disconnect the connector. |
|
(b) Remove the 2 nuts and the blind spot monitor sensor cover LH.
3. REMOVE BLIND SPOT MONITOR SENSOR LH
|
(a) Remove the nut and the blind spot monitor sensor LH. |
|
4. REMOVE BLIND SPOT MONITOR COVER RH
|
(a) Disconnect the connector. |
|
(b) Disengage the clamp.
(c) Remove the 3 nuts and the blind spot monitor sensor cover RH.
5. REMOVE BLIND SPOT MONITOR SENSOR RH
|
(a) Remove the blind spot monitor sensor RH. |
|
|
|