Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJB0 |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 11/2017] |
Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: C1AB7; Blind Spot Monitor Slave Module; 2016 - 2017 MY Sienna [12/2015 - 11/2017] |
DTC
|
C1AB7
|
Blind Spot Monitor Slave Module
|
DESCRIPTION
This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.
DTC No.
|
DTC Detection Condition
|
Trouble Area
|
C1AB7
|
The blind spot monitor sensor LH (slave) detects an internal malfunction.
|
Blind spot monitor sensor LH
|
CAUTION / NOTICE / HINT
NOTICE:
When checking for DTCs, make sure that the blind spot monitor main switch (warning canceling switch assembly) is on.
PROCEDURE
(a) Clear the DTCs (See page
).
(b) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
OK |
|
USE SIMULATION METHOD TO CHECK
(See page
)
|
|