Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJ9B |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 11/2017] |
Title: PARK ASSIST / MONITORING: ULTRASONIC SENSOR(for Rear Side): REMOVAL; 2016 - 2017 MY Sienna [12/2015 - 11/2017] |
REMOVAL
PROCEDURE
1. REMOVE REAR BUMPER COVER
(See page
)
2. REMOVE NO. 1 ULTRASONIC SENSOR (for Back Sensor)
(a) Disconnect the connector.
HINT:
Use the same procedure for the remaining parts.
(b) Disengage the 2 claws as shown in the illustration and release the lock and remove the No. 1 ultrasonic sensor.
HINT:
Use the same procedure for the remaining parts.
|
|
3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (for Back Sensor)
(a) Disengage the 2 claws and remove the No. 1 ultrasonic sensor retainer.
HINT:
Use the same procedure for the remaining parts.
4. REMOVE NO. 1 ULTRASONIC SENSOR (for Corner Sensor)
(a) Disconnect the connector.
HINT:
Use the same procedure for the remaining parts.
(b) Disengage the 2 claws as shown in the illustration and release the lock and remove the No. 1 ultrasonic sensor.
HINT:
Use the same procedure for the remaining parts.
|
|
5. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (for Corner Sensor)
(a) Disengage the 2 claws and remove the No. 2 ultrasonic sensor retainer.
HINT:
Use the same procedure for the remaining parts.
|