Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VJ86
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 11/2017]
Title: PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: DTC CHECK / CLEAR; 2016 - 2017 MY Sienna [12/2015 - 11/2017]

DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Chassis / Parking Assist Monitor System / Trouble Codes.

(e) Check the details of the DTCs (See page 2016 - 2017 MY Sienna [12/2015 - 11/2017]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: DIAGNOSTIC TROUBLE CODE CHART ).

HINT:

The parking assist ECU may store the DTCs of the following system. If DTCs other than those specified in Diagnostic Trouble Code Chart of the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the applicable system.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Chassis / Parking Assist Monitor System / Trouble Codes.

(e) According to the display on the Techstream, select the trouble code data display with the clear button.