- A non mass-storage class or incompatible protocol USB device connected
- USB device with an incompatible file system, corrupted or incompatible File Allocation Table (FAT) connected
- "iPod" malfunction
- "iPod" with unsupported firmware connected
- Unsupported "iPod" model is connected
| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJ7C |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 11/2017] |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: B1585; USB Media Malfunction; 2016 - 2017 MY Sienna [12/2015 - 11/2017] | ||
|
DTC |
B1585 |
USB Media Malfunction |
DESCRIPTION
This DTC is stored when a malfunction occurs in a connected device.
|
DTC No. |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
B1585 |
When one of the conditions below is met: |
|
PROCEDURE
|
1. |
REPLACE USB DEVICE OR "iPod" |
(a) Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
(b) Turn the ignition switch off.
HINT:
When this DTC has been stored, it is necessary to turn the ignition switch off make it possible for the vehicle to recognize a new device when it is connected.
(c) Turn the ignition switch ACC.
(d) Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
HINT:
- If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
-
Refer to System Description for compatible formats and versions (See page
![2016 - 2017 MY Sienna [12/2015 - 11/2017]; NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: SYSTEM DESCRIPTION](/t3Portal/stylegraphics/info.gif)
).
|
|
2. |
CHECK DTC |
(a) Clear the DTCs (See page
).
(b) Recheck for DTCs and check that no DTCs are output.
OK:
No DTCs are output.
| OK |
|
USB DEVICE FORMAT WAS INCOMPATIBLE, "iPod" VERSION WAS INCOMPATIBLE, OR USBDEVICE OR "iPod" WAS DEFECTIVE |
| NG |
|
|
|