- CAN communication system
- Smart key system
- Certification ECU (smart key ECU assembly)
- Navigation receiver assembly
| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJ77 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 11/2017] |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: B15F7; Certification ECU Vehicle Information Reading/Writing Process Malfunction; 2016 - 2017 MY Sienna [12/2015 - 11/2017] | ||
|
DTC |
B15F7 |
Certification ECU Vehicle Information Reading/Writing Process Malfunction |
DESCRIPTION
This DTC is stored when items controlled by the certification ECU (smart key ECU assembly) cannot be customized via the navigation system vehicle customization screen.
HINT:
The certification ECU (smart key ECU assembly) controls the smart key system related items that are customizable via the navigation system vehicle customization screen.
|
DTC No. |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
B15F7 |
Certification ECU (smart key ECU assembly) vehicle setting processing error |
|
CAUTION / NOTICE / HINT
NOTICE:
Before replacing the certification ECU (smart key ECU assembly), refer to Registration (See page
![2016 MY Sienna [12/2015 - 08/2016]; THEFT DETERRENT / KEYLESS ENTRY: ENGINE IMMOBILISER SYSTEM(w/ Smart Key System): REGISTRATION](/t3Portal/stylegraphics/info.gif)
).
PROCEDURE
|
1. |
CHECK CAN COMMUNICATION SYSTEM |
(a) Use the Techstream to check if the CAN communication system is functioning normally (See page
).
OK:
CAN communication DTCs are not output.
| NG |
|
GO TO CAN COMMUNICATION SYSTEM (See page
|
|
|
2. |
CHECK SMART KEY SYSTEM |
(a) for Entry Function:
Check if the smart key system is malfunctioning (See page
).
for Start Function:
Check if the smart key system is malfunctioning (See page
).
HINT:
Customization may not be possible depending on the malfunction in the smart key system.
OK:
No malfunctions are present in the smart key system.
(b) Proceed to the next step based on the check result.
Result
|
Result |
Proceed to |
|---|---|
|
OK |
A |
|
NG (for Entry Function) |
B |
|
NG (for Start Function) |
C |
| B |
|
| C |
|
|
|
3. |
CHECK CUSTOMIZE ITEMS |
(a) Make a note of the customizable items for the certification ECU (smart key ECU assembly) related system.
HINT:
The items shown as customizable via the navigation system vehicle customization screen can also be changed using the Techstream. In the following step, the Techstream will be used.
(1) To match-up the items on the navigation system vehicle customization screen with the items on the Techstream, check the customize parameters list for the smart key system (for Entry Function) related items that can be customized via the navigation system vehicle customization screen (See page
).
(2) To match-up the items on the navigation system vehicle customization screen with the items on the Techstream, check the customize parameters list for the smart key system (for Start Function) related items that can be customized via the navigation system vehicle customization screen (See page
).
(b) Using the Techstream, confirm that it is possible to change the settings of the customize parameters that are available for customization via the navigation system vehicle customization screen.
OK:
The items available for customization via the navigation system vehicle customization screen can be customized successfully using the Techstream.
| OK |
|
| NG |
|
|
|