Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VJ64
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 11/2017]
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: AVC-LAN Circuit; 2016 - 2017 MY Sienna [12/2015 - 11/2017]

AVC-LAN Circuit

DESCRIPTION

Each unit of the navigation system connected to the AVC-LAN (communication bus) transfers switch signals through the AVC-LAN.

If a short to +B or short to ground occurs in the AVC-LAN, the navigation system will not function normally because communication is not possible.

WIRING DIAGRAM

CAUTION / NOTICE / HINT

HINT:

The navigation receiver assembly is the master unit.

PROCEDURE

1.

INSPECT NAVIGATION RECEIVER ASSEMBLY

(a) Remove the navigation receiver assembly (See page 2016 - 2017 MY Sienna [12/2015 - 11/2017]; NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER: REMOVAL ).

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

7 (TX1+) - 8 (TX1-)

Always

60 to 80 Ω

Text in Illustration

*a

Component without harness connected

(Navigation Receiver Assembly)

NG

REPLACE NAVIGATION RECEIVER ASSEMBLY

OK

2.

CHECK HARNESS AND CONNECTOR (AVC-LAN CIRCUIT)

(a) Disconnect the D153 navigation receiver assembly connector.

(b) Disconnect the L5 stereo component amplifier assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

L5-8 (TX+) - D153-7 (TX1+)

Always

Below 1 Ω

L5-7 (TX-) - D153-8 (TX1-)

Always

Below 1 Ω

L5-8 (TX+) - Body ground

Always

10 kΩ or higher

L5-7 (TX-) - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK

3.

INSPECT MALFUNCTIONING PARTS

(a) Disconnect and reconnect each slave unit one by one until the master unit returns to normal operation.

HINT:

  • Check all slave units.
  • If disconnecting a slave unit causes the master unit to return to normal operation, the slave unit is defective and should be replaced.

OK:

Master unit returns to normal operation.

OK

REPLACE MALFUNCTIONING PARTS

NG

REPLACE NAVIGATION RECEIVER ASSEMBLY