Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VJ5C
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 11/2017]
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Cellular Phone Registration Failure; 2016 - 2017 MY Sienna [12/2015 - 11/2017]

Cellular Phone Registration Failure

CAUTION / NOTICE / HINT

HINT:

If the operation of a cellular phone or the radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

PROCEDURE

1.

CHECK USAGE CONDITION

(a) Check that the vehicle and cellular phone meet the following conditions:

NOTICE:

If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.

  • The cellular phone is "Bluetooth" compatible (See page 2016 - 2017 MY Sienna [12/2015 - 11/2017]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: SYSTEM DESCRIPTION ).
  • "Bluetooth" setting of the cellular phone is on.
  • Operating system and software of the cellular phone are the latest versions.
  • There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.

(b) Register the cellular phone again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

OK:

The cellular phone is registered correctly.

OK

END (USAGE CONDITION WAS DEFECTIVE)
NG

2.

RESTART CELLULAR PHONE

(a) Turn the ignition switch off.

(b) Turn the ignition switch to ACC.

(c) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

OK:

The cellular phone is registered correctly.

OK

END (TEMPORARY MALFUNCTION WITH "Bluetooth" OF CELLULAR PHONE)
NG

3.

CHECK BRING CELLULAR PHONE NEAR IN-VEHICLE DEVICE

(a) Place the cellular phone close to the radio and display receiver assembly.

(b) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

OK:

The cellular phone is registered correctly.

OK

END (TEMPORARY MALFUNCTION WITH "Bluetooth")
NG

4.

CLEAR REGISTERED DEVICE INFORMATION

(a) Clear all "Bluetooth" devices registered to the cellular phone and radio and display receiver assembly.

(b) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

OK:

The cellular phone is registered correctly.

OK

END (TEMPORARY MALFUNCTION WITH "Bluetooth")
NG

5.

CHECK USING ANOTHER VEHICLE

(a) Check if the cellular phone can be registered normally to another "Bluetooth" audio compatible vehicle of the same model.

HINT:

  • Make sure to obtain the customer's permission to perform this procedure.
  • After the inspection, clear the registered information and usage history acquired during the inspection.
  • If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

OK:

The cellular phone is registered correctly.

OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

6.

CHECK USING ANOTHER CELLULAR PHONE

(a) Using another "Bluetooth" compatible cellular phone, register the cellular phone and check that it is registered correctly.

HINT:

  • Make sure to obtain the customer's permission to perform this procedure.
  • After the inspection, clear the registered information and usage history acquired during the inspection.
  • If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

OK:

The cellular phone is registered correctly.

OK

END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)
NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY